B1.62
Hyp Configuration Register 2
The HCR2 characteristics are:
Purpose
Provides additional configuration controls for virtualization.
Usage constraints
This register is accessible as follows:
EL0
(NS)
EL0
(S)
EL1
(NS)
EL1
(S)
EL2 EL3
(SCR.NS = 1)
EL3
(SCR.NS = 0)
-
-
-
-
RW RW
-
Configurations
HCR2 is architecturally mapped to AArch64 register HCR_EL2[63:32]. See
.
This register is accessible only at EL2 or EL3.
Attributes
HCR2 is a 32-bit register.
RES
0
31
0
CD
ID
1
2
Figure B1-18 HCR2 bit assignments
[31:2]
Reserved,
RES0
.
ID, [1]
Stage 2 Instruction cache disable. When HCR.VM is 1, this forces all stage 2 translations for
instruction accesses to Normal memory to be Non-cacheable for the EL1/EL0 translation
regime. The possible values are:
0
No effect on the stage 2 of the EL1/EL0 translation regime for instruction accesses.
1
Forces all stage 2 translations for instruction accesses to Normal memory to be Non-
cacheable for the EL0/EL1 translation regime.
CD, [0]
Stage 2 Data cache disable. When HCR.VM is 1, this forces all stage 2 translations for data
accesses and translation table walks to Normal memory to be Non-cacheable for the EL1/EL0
translation regime. The possible values are:
0
No effect on the stage 2 of the EL1/EL0 translation regime for data accesses and translation
table walks.
1
Forces all stage 2 translations for data accesses and translation table walks to Normal
memory to be Non-cacheable for the EL0/EL1 translation regime.
B1 AArch32 system registers
B1.62 Hyp Configuration Register 2
100236_0100_00_en
Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
B1-246
Non-Confidential
Summary of Contents for Cortex-A35
