C11.51 Integration Instruction ATB Data Register
The TRCITIDATAR characteristics are:
Purpose
Sets the state of the
ATDATAMn
output pins shown in the following table.
Usage constraints
• Available when bit[0] of TRCITCTRL is set to 1.
• The value of the register sets the signals on the output pins when the register is written.
Configurations
Available in all configurations.
Attributes
See
31
1 0
RES
0
ATDATAM[31]
2
3
4
5
ATDATAM[23]
ATDATAM[15]
ATDATAM[7]
ATDATAM[0]
Figure C11-50 TRCITIDATAR bit assignments
For all non-reserved bits:
• When a bit is set to 0, the corresponding output pin is LOW.
• When a bit is set to 1, the corresponding output pin is HIGH.
• The TRCITDDATAR bit values correspond to the physical state of the output pins.
[31:5]
Reserved,
RES0
.
ATDATAM[31], [4]
Drives the
ATDATAM[31]
output.
ATDATAM[23], [3]
Drives the
ATDATAM[23]
output.
ATDATAM[15], [2]
Drives the
ATDATAM[15]
output.
ATDATAM[7], [1]
Drives the
ATDATAM[7]
output.
ATDATAM[0], [0]
Drives the
ATDATAM[0]
output.
The TRCITIDATAR can be accessed through the external debug interface, offset
0xEEC
.
C11 ETM registers
C11.51 Integration Instruction ATB Data Register
100236_0100_00_en
Copyright © 2015–2017, 2019 Arm Limited or its affiliates. All rights
reserved.
C11-798
Non-Confidential
Summary of Contents for Cortex-A35
