C2.2
PMU functional description
This section describes the functionality of the PMU.
The PMU includes the following interfaces and counters:
Event interface
Events from all other units from across the design are provided to the PMU.
System register and APB interface
You can program the PMU registers using the system registers or the external APB interface.
Counters
The PMU has 32-bit counters that increment when they are enabled, based on events, and a 64-
bit cycle counter.
PMU register interfaces
The Cortex-A76 core supports access to the performance monitor registers from the internal
system register interface and a memory-mapped interface.
C2.2.1
External register access permissions
Whether or not access is permitted to a register depends on:
• If the core is powered up.
• The state of the OS Lock and OS Double Lock.
• The state of External Performance Monitors access disable.
• The state of the debug authentication inputs to the core.
The behavior is specific to each register and is not described in this document. For a detailed description
of these features and their effects on the registers, see the
Arm
®
Architecture Reference Manual Arm
®
v8,
for Arm
®
v8-A architecture profile
.
The register descriptions provided in this manual describe whether each register is read/write or read-
only.
C2 Performance Monitor Unit
C2.2 PMU functional description
100798_0300_00_en
Copyright © 2016–2018 Arm Limited or its affiliates. All rights
reserved.
C2-373
Non-Confidential
Summary of Contents for Cortex-A76 Core
