C4.4
Resetting the ETM
The reset for the ETM trace unit is the same as a Cold reset for the core.
The ETM trace unit is not reset when Warm reset is applied to the core so that tracing through Warm core
reset is possible.
If the ETM trace unit is reset, tracing stops until the ETM trace unit is reprogrammed and re-enabled.
However, if the core is reset using Warm reset, the last few instructions provided by the core before the
reset might not be traced.
C4 Embedded Trace Macrocell
C4.4 Resetting the ETM
100798_0300_00_en
Copyright © 2016–2018 Arm Limited or its affiliates. All rights
reserved.
C4-396
Non-Confidential
Summary of Contents for Cortex-A76 Core
