ARM Instruction Reference
ARM DUI 0068B
Copyright © 2000, 2001 ARM Limited. All rights reserved.
4-53
4.4.8
MIA, MIAPH, and MIAxy
XScale coprocessor 0 instructions.
Multiply with internal accumulate (32-bit by 32-bit, 40-bit accumulate).
Multiply with internal accumulate, packed halfwords (16-bit by 16-bit twice, 40-bit
accumulate).
Multiply with internal accumulate (16-bit by 16-bit, 40-bit accumulate).
Syntax
MIA{
cond
}
Acc
,
Rm
,
Rs
MIAPH{
cond
}
Acc
,
Rm
,
Rs
MIA<
x
><
y
>{
cond
}
Acc
,
Rm
,
Rs
where:
cond
is an optional condition code (see
Conditional execution
on page 4-4).
Acc
is the internal accumulator. The standard name is
acc
x
, where
x
is an
integer in the range 0-
n
. The value of
n
depends on the processor. It is 0
in current processors.
Rm, Rs
are the ARM registers holding the values to be multiplied.
<
x
>
is either
B
or
T
.
B
means use the bottom end (bits [15:0]) of
Rm
,
T
means
use the top end (bits [31:16]) of
Rm
.
<
y
>
is either
B
or
T
.
B
means use the bottom end (bits [15:0]) of
Rs
,
T
means
use the top end (bits [31:16]) of
Rs
.
r15 cannot be used for either
Rm
or
Rs
.
Usage
The
MIA
instruction multiplies the signed integers from
Rs
and
Rm
, and adds the result to
the 40-bit value in
Acc
.
The
MIAPH
instruction multiplies the signed integers from the lower halves of
Rs
and
Rm
,
multiplies the signed integers from the upper halves of
Rs
and
Rm
, and adds the two 32-bit
results to the 40-bit value in
Acc
.
