14
the resistance of the measured circuit.
6)
WARNING
When measuring Continuity on the line, disconnect the
power supply and discharge all the high-voltage
capacitors. Otherwise, the instrument may be damaged and
may be struck by electric shocks.
Diode measurement
1)
Turn the knob to
shift and Switch to diode measurement
function according to "FUNC." key.
2)
Insert the red probe in “
” socket
，
insert the black
probe in “COM” socket
。
3)
Touch the diode anode with the red probe, the black probe
contacts the diode cathode.
4)
Read the measurement result on the screen.
7)
WARNING
When measuring diode on the line, disconnect the power
supply and discharge all the high-voltage capacitors.
Otherwise, the instrument may be damaged and may be
NCV test
1)
Turn the knob to the
shift, and Switch to NCV test
function according to "FUNC." key. Meter will display "NCV".
2)
Then NCV probe gradually approaches the detected point.
3)
When the meter senses weak AC signals, the green indicator
