Armada Pro95, Instruction Manual

 Clamp 

Meter 

6

5.  BUTTON INSTRUCTION 

5-1  HOLD & LPF Function 

It is possible to freeze the value displayed by pressing on the 
"

HOLD

" button. Press the "

HOLD

" button again to exit the Hold 

mode. 

To activate the Low Pass Filter (LPF) feature, press and hold the 
“

LPF

” button until the symbol displays. To deactivate the LPF 

feature, press and hold the “LPF” button for 2 seconds. The meter 
will return to normal mode of operation. 

The Cut-Off frequency of the low pass filter is about 160Hz 
with attenuation characteristic of approx. -24dB/octave.

Note:

 The LPF function operates on the AC A and AC mA ranges. 

5-2 PEAK Hold & 

 /   Function Selection 

Press "

PEAK

" button to enter the PEAK mode, the meter records 

the peak maximum value. Press the "

PEAK

" button again, to exit the 

peak mode. 

When you turn the rotary switch to the Ohms/Continuity Test 
position, press the "

PEAK

" button to select Resistance 

measurement, press the "PEAK" button again to select continuity 
test with buzzer. 

5-3  ZERO Function 

Press "

ZERO

" button to enter the Zero mode, ZERO Annunciate will 

appear and Zero the display. The reading is stored as reference 
value for subsequent measurement.  

Press the "

ZERO

" button again, to exit the zero mode. 

5-4  BACKLIGHT Function 

When the " " button is pressed, the backlight will be turned on.  

Press the button again to turn the backlight off. If the button is not 
pressed again then the backlight will be automatically turned off in 
about 30 seconds after it is turned on.