29
ARMASIGHT by FLIR
COMMAND
U S E R M A N U A L
SECTION 4
MAINTENANCE AND TROUBLESHOOTING
4.1 PREVENTIVE MAINTENANCE CHECKS AND SERVICES
Table 4-1 Preventive Maintenance Checks and Services (PMCS), has been provided so that you can keep
your equipment in good operating condition.
Perform functional tests in the order listed in Table 4-1.
Operating procedures are detailed in Chapter 3.
Explanation of Table Entries:
SEQ NO. column.
Sequence numbers are for reference and appear in the order required to perform
checks and services.
LOCATION OF ITEM TO CHECK/ SERVICE column.
Indicates the location and the item to be checked
or serviced.
PROCEDURE column.
Details the check/ service procedure.
NOT FULLY MISSION CAPABLE IF... column.
Indicates what faults will prevent your equipment from
operating successfully.
TABLE 4-1. PREVENTIVE MAINTENANCE CHECKS AND SERVICES
SEQ
NO.
LOCATION OF
ITEM TO CHECK/
SERVICE
PROCEDURE
NOT FULLY MISSION
CAPABLE IF...
PRE-OPERATION CHECKS
1
Completeness
Open storage/ carrying case and inventory
items by comparing with the data in this
manual.
Missing items.
2
Soft Carrying
Case
Shake out loose dirt or foreign material.
Inspect for tears, cuts, excess wear, or
damage.
3
Body
Inspect for cracks or damage. Scratches and
gouges are OK if operation is not affected.
Inspect for missing parts.
Clean as required.
Cracked or damaged. Missing
parts.
4
Objective Lens
Cap
Inspect for cuts, tears, and dirt.
Clean as required.
Cap is torn or cut. Cap is not
secured to the housing of the
lens.
