1-5
Note:
Some older TVs do not have RCA Video In connectors. They use
coaxial cable instead (you’ll know that you have one if the video
cable plug doesn’t fit).
In that case, you will need to connect through an RF modulator
(not included with TV PicShare). You can purchase an RF
modulator and cable from your local electronics store or directly
from Radio Shack (Cat. #: 15-1244; Model 15-1244) at
www.radioshack.com.
Follow the instructions included with the RF modulator to connect it to
your TV. Then plug the larger end of the video cable into the yellow
VIDEO IN connector on the RF modulator, and plug the smaller end into
the VIDEO connector on the back of TV PicShare. Set your TV to the
channel that you set the RF modulator (usually 3 or 4).
Summary of Contents for TV PicShare
