WARNING
Improper installation, service, maintenance, or
use can cause explosion, fire, electrical shock,
or other conditions, which may cause personal
injury or property damage and will void the
warranty.
Check with Armcor Air Solutions for any
information required on this equipment.
DANGER
Electrical shock can cause personal injury or
death. Before performing any work on this
equipment, the electrical supply must be
electrically isolated to avoid the possibility of
shock, injury, or damage to the equipment. There
may be more than one power supply circuit to
the unit.
Installation by Authorised Personnel
•
Only trained and qualified personnel should install, repair or
service heat recovery and/or air handling equipment.
• Installing and servicing equipment can be hazardous due to
electrical and mechanical components.
•
When working on equipment, observe precautions in all
literature, tags and labels attached to or shipped with the
unit. Follow all safety codes and guidelines. Wear work
gloves, safety goggles and protective clothing.
• All work must comply with relevant SAA Wiring Rules
and local authority codes. Installers must ensure that all
statutory regulations and by laws have been addressed.
• Installers must ensure that the structures built to support
the equipment have been suitably constructed for the
purpose, all safety precautions have been applied prior to
installation, and all preparation work has been suitably
sized and installed for its purpose.
Safety
4 OAP – Outside Air Package Units Installation and Operation Manual 2021
