2
Manual Armon Edero Version 1.5
Date: October 2018
Foreword
This manual has been written for the owners and operators of the Armon Edero. It contains general instructions on
operation, precautionary practices, maintenance and parts information.
Before using the product please make sure that you read the complete manual thoroughly and become
familiar with the controls as well as the accessories. This is essential for your own safety and in order to maximize
the use, functionality, efficiency and lifespan of your unit.
Specifications put forth in this manual were in effect at the time of publication. However, owing to Armon Products
BV’s
policy of continual improvement, changes to these specifications may be made at any time without obligation
on the part of Armon Products BV.
Symbols used in this manual
:
ATTENTION!
Read these parts extra carefully for they contain warnings.
:
end-of-life; information about disposal at the end of the useful life of the product.
Intended use:
The Armon Edero is a dynamic arm support and should only be used to support the weight of an arm with a
maximum weight of 5600 grams per arm. The Edero Light version maximum 2900 grams.
About the Armon Edero
The Armon Edero is an dynamic arm support. It is developed to support the arm. It has a unique spring
compensation mechanism which compensates the weight of the users arm. The Edero supports the arm in a large 3D
working area. The Armon Edero can compensate an arm weight from 875 grams up to 5600 grams. The Armon Edero
Light 350 up to 2900 grams. The weight compensation is adjustable in 12 steps of approximately 400 grams per step.
For the Light version 225 grams. It is possible to mount the four different types of Armon braces. The Armon Edero
consists mainly out of die cast aluminum. A standard Armon Edero set consists out of the following components:
●
Edero Base
●
Edero Links
●
Edero Brace
●
Edero Table Clamp. It is possible that your Armon Edero is delivered
with a different Brace and different mounting accessory instead of the Edero Table Clamp. Please contact your
supplier about the details for your set up.
Mounting options of the Edero.
The Edero can be mounted in different ways using different mounting accessories. These ways are:
1.
Table Clamp
The mounting of the Edero in combination with the Table Clamp is explained on the next
pages below
How to set up the Armon Edero.
2.
Office Chair Bracket
The Office chair bracket Edero is a bracket with which you can easily attach one or two Edero
arm supports to most office chairs or another kind of chair. For more information about the
Office Chair Bracket see the Armon Products user manual of the Office Chair Bracket.
3.
Customized bracket
Because every user and situation is different, a standard mounting solution is often not
possible. Therefore frequently a to the user
’s
situation adapted bracket is custom made.
No matter which mounting accessory is used, the point on which the links of the Edero are placed should always be
the Armon Products Edero Pin. See the picture on the right. This axle is specially made to carry the Edero links.
