background image

 

 

   

Manual Armon Edero Version 1.5 

 

Date: October 2018         

 

   

ATTENTION!

 It is very important that the Edero links are always properly put on the Edero Pin. Make sure 

the links go all the way over the pin. The angled top part of the pin must stick out of the links, like in the picture 
below. If this is not done correctly, parts of the Edero links can break. Check regularly, and after every reassembly. 

 

 

 

 

 

Braces 

Armon Products has four different types of braces and every type 
is available in three different sizes. The brace is the part where 
you put your arm in. It is the connection between the arm support 
and the user. The braces are exchangeable between all our arm 
supports. The braces available in ascending order of functionality: 

 

  

  

 

                 Edero brace   

             Basic brace 

 

        Ergo brace      

  

 Ergo plus brace 

 
The more advanced the brace, the more functionality you can achieve with this brace. 

 
How to set up the Armon Edero  
 

The Edero will be delivered in a box, outer dimensions: l/w/h  49x29x17 cm, like in the picture below.

 

 

Summary of Contents for Edero










Reviews: