5
Manual Armon Elemento Version 1.4
Date:August 2018
Attaching the brace
All
our braces are exchangeable between all our arm supports. You can easily attach and detach them. See
the pictures and explanation below.
1.
2.
3.
4.
1/2 Hold the brace with the slot pointing in the direction of the washers.
3 Pull back the clip inwards until the hook can be positioned completely over the spindle.
Slide the hook completely over the spindle between the washers and release the clip
4 Make sure the clip locks over the head of the spindle. The head of the spindle should cross through the
middle hole of the clip.
ATTENTION!
If you are not comfortable or sure how to properly place your arm into the Brace,
please contact your supplier. If you are not able to independently level your arm when the compensation
force drops out, you should not be using this product.
