SECTION 3
GETTING STARTED
PAGE 54
9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev B
Table 1. Install the Battery Packs
STEP
ACTION
CONDITION OR INDICATION
1.
Locate the bottom latch between the
two battery compartments on the back
of the unit, as shown in Figure 29 .
2.
Press in and hold the button while
sliding the latch down.
CAUTION!
Do not force the battery into
position. If the battery will not
slip easily onto the connector,
pull it slightly toward the center
compartment wall and press in
gently.
3.
Position the first battery as shown in
Figure 29 and gently press down on
the battery until the connector seats.
Figure 30. Battery Positioned for Insertion
BATTERY #1
LATCH
