SECTION 7
MAINTAINING YOUR X10GX
PAGE 99
9711-26020-0001
Exp o rt Co n tro lle d – S e e P a g e 3
Rev B
These options allow you to select which external antennas will be used by the X10gx. You can
select GPS only, WWAN only, or both antennas. If only one external antenna is selected, the
other radio will operate on its internal antenna. The initial default option is “
Both
”.
Regardless of how you configure your radios and the Dock RF Switch during your session, they
will return to their default settings the next time you restart the computer unless you save your
settings using the
Save Settings
button.
Save Settings Button
Once you configure each radio and the RF switch to suit the way you normally use them (
ON
or
OFF
), you can press the
Save Settings
button to save the current configuration as your new
default settings.
Click on the
Radios ON/OFF
button to turn off or turn on all radios currently enabled. This is
particularly handy if you’re on a commercial aircraft and you want to continue working with the
computer without interfering with the aircraft electronic systems.
Radios ON/OFF Toggle Button
When you arrive at your destination, just click on the
All Radios ON/OFF
button again to turn
on the radios you previously had enabled.
