background image

5

General Safety Information

GENERAL

This manual contains all the details concerning the commissioning, operation and maintenance 

of the ExpressPack®.

Maintenance, service, repairs, as well as the study of the risks and dangers associated with 

these operations must be carried out by qualified, competent and authorized personnel.

- Make sure that all risks or dangers are defined beforehand by an authorized person, especially 

for works-at-height.

- We also recommend installing a security perimeter.

- Make sure that the steam output of the humidifier is turned off before any maintenance.

- Please screw periodically all the connection terminals of the power cable.

INTENDED USE

The ExpressPack® manufactured by Armstrong - Devatec is intended solely for humidification 

purpose, in air treatment station or in air flow. The user undertakes to use it according to the 

safety instructions given in this manual.

Improper use could result in serious hazards and damages to the user, third parties and ma

-

terials.

STORAGE 

The device must be stored in a dry, frost-free place, protected from shocks and vibrations.

WARRANTY

The group Armstrong International S.A., guarantees that its devices are 

one (1) year

 warranty. 

Armstrong’s liability will be limited exclusively to Armstrong’s repair or replacement of the part 

or product, excluding labor, disassembly or installation costs. Armstrong may also decide to 

refund the purchase price of the product or part of it, at its discretion. The non-compliance of 

these above recommendations, additional mounting and/or transformation with components 

other than those provided with the device or any use other than what is explicitly stated, shall 

be considered as not in compliance with the prescriptions, and will invalidate the warranty. 

LIABILITY

Armstrong shall be not made liable for the consequences of incorrect installation, improper use 

of the devices and/or their components.

We are committed to provide you the most complete manual, although, in the air treatment 

field, variations are so common that the information found in this document may be subject to 

changes without notice.

Summary of Contents for ExpressPack

















Reviews:

Related manuals for ExpressPack