ACM-IP2 ANALOGUE SUBSYSTEMS MODULE
User Manual
page 4/28
armtel.com
© Armtel
info@armtel.com
ENG
1 DESCRIPTION AND OPERATION
1.1 Features
ACM-IP2 is designed for use in distributed and centralized digital Intercom and Public
Address / General Alarm communication systems (based on allotted SIP server) at industrial
and transportation facilities.
АСМ
-IP2 enables to use analogue equipment and to interact with automation and
alarm units.
АСМ
-IP2 is installed in communication cabinets, racks located in offices and control
rooms.
ACM-IP2 has two versions. Versions of
АСМ
-IP2 are shown in Table 1. External
appearance is given in Appendix B.
Table 1 - Versions of
АСМ
-IP2
Identification
ADSL-IP2 Adapter
RMLT.465275.006
Not included
RMLT.465275.006-01
Included
ACM-IP2 can provide the following functions:
−
simplex communication with analogue and digital terminal units via «Armtel-IP»
and SIP protocols;
−
communication with analogue and digital terminal units using ADSL channel
and wireless data transfer Wi-Fi channel (for version RMLT.465275.006-01);
−
construction of loud-speaking zonal alarm system (up to eight zones) with
the help of additional power amplifier and additional modules with relays
ARMT.665200.117 for switching of loudspeaker lines;
−
recording of voice messages from terminal units to SD-card in WAV file format
with linear encoding of 16 bit 16 kHz, the size of the message depends on the
available space on the memory card of the unit. The total duration of messages
is more than 1500 minutes;
−
playback of recorded voice messages on the terminal units;
−
providing of calls priorities, set during configuration of the subscriber units, via
SIP and «Armtel-IP» protocols.
