DIS DIGITAL DESKTOP CALL STATION
User Manual
стр. 18/32
armtel.com
© Armtel
info@armtel.com
ENG
2 INTENDED USE
The product is designed for continuous 24-hour a day operations. After
commissioning, the product does not require operator intervention, unless:
Maintenance;
Product configuration changes.
Maintenance personnel must be strictly guided by this document in compliance with
safety regulations.
The product along with the operational documentation is delivered to the customer in
packaged form.
2.1 Operating limits
2.1.1 DIS shall be used under exposure factors and ambient parameters which do
not exceed permissible values given in Table 1.
2.1.2 It is forbidden to supply power to the DIS simultaneously through the main
and “phantom” power supply circuits of the product.
2.1.2 The requirements for operating conditions and the choice of the place of
installation given in this document take into account the most typical factors that
affect the operation of DIS.
Factors that cannot be predicted, estimated, or verified, and which the manufacturer
was unable to factor in during development may exist or arise during operation at the
operating facility.
In the event of such factors, find another operating site where said factors do not exist
or do not affect the operation of the product.
2.2 Preparation for use
Preparation of DIS for use is carried out by representatives of the manufacturer, or by
personnel who have been trained (instructed) in the operation of products of Armtel LLC.
The main preparation of the product for use is carried out during installation and connection.
Preparation of DIS for work includes several activities:
1.
Removing DIS and connection cables from the shipping container.
2.
Removing DIS and connection cables from the customer package.
3.
Check the scope of supply of DIS according to product passport.
