Toronto
Italiano
18
05060106 01 27/08/2015
4. Identification - Nameplate (Fig. 3)
5. Identification - Rating plate data (Fig. 2)
Inside the unit there is a rating plate with all of the data regarding characteristics:
1) Manufacturer name and address
2) Unit name and length
3) Unit code
4) Unit serial number
5) Supply voltage
6) Power supply frequency
7) Current absorbed in normal operation
8) Power absorbed during operation in refrigeration phase (fans + hot cables)
9) Power absorbed during defrost phase (fans + hot defrost resistance)
10) Lighting power (where installed)
11) Usable display space
12) Usable load volume
13) Type of refrigerant fluid used by the unit
14) Environmental climate class and reference temperature
15) Anti-humidity protection class
16) Unit production work order number
17) Order number for unit production
18) Unit production year
In the case of a request for technical assistance, it is enough to communicate the following for identifi-
cation of the unit: product name (2); serial number (4); work order number (16)
6. Transportation (Fig. 3)
The units are provided with a wooden support attached to the bottom for movement using forklifts.
Always place the loading fork at the point indicated on the wooden support, in order to avoid
risk of overturning.
. Use an appropriate manual or electric fork lift to raise the unit in question, with a
nominal capacity greater to or equal to 1000 kg.
7. Receipt and initial cleaning
Upon receipt of the unit:
- make sure that the packaging is intact and does not show any obvious damage;
- carefully unpack the unit so as to not cause any damage;
- check all parts of the unit, making sure that all components are intact;
- if any damage is found, immediately contact your supplier;
- carry out an initial cleaning using neutral products and drying the unit with a soft cloth. Do not use
abrasive substances or metallic sponges.
- do not use alcohol or similar products to clean the parts in Plexiglas.
For proper disposal of the packaging, please remember that it consists of:
Wood - Polystyrene - Polythene - PVC - Cardboard.
Pursuant to EEC Directive 94/62, the appropriateness of the above materials is here declared.
4
30
55
20,0
14,8
6
27
70
21,1
15,8
5
40
40
23,9
18,8
7
35
75
30,0
27,3
8
23,9
55
14,3
10,2
The weight of water vapor in dry air is one of the main points that affect the performance and
power consumption of the cabinets
Declaration of
conformity
A copy of the conformity statement is annexed to the cabinet
If you lose the original copy of the Declaration of Conformity supplied with
the cabinet, download a copy by filling out the form available on the internet
addresses:
- for Italy: http://www.arneg.it/conformita/it
- overseas: http://www.arneg.it/conformita/en
