Victoria
English
26
05060124 00 19/12/2011
10.Installation and environmental conditions -
specialized technician
-
To ensure that the technicians appointed to installation may operate safely, we
recommend to use the instruments and protection clothing required by the safety
norms or by the laws in force in the country of installation. At any rate, always use
adequate equipment and clothing, such as:
anti-injury boots, protection gloves,
spirit level.
For the installation, adhere to the following:
z
carefully examine the installation area, eliminating any danger to the operator;
Do not position the cabinet:
z
in environments where explosive gaseous substances are present;
z
in open air and therefore subjected to atmospheric agents;
z
near heat sources (direct sunlight, heating systems, incandescence lamps, etc.)
z
near air currents (near doors, windows, air-conditioning systems, etc.) that exceed
a speed of
0.2 m/sec
.
Remove the supports in wood at the base (used for transport) and assemble the
adjustable feet (Rif. 8) positioning them so as to place the cabinet horizontally, aiding
yourself of a level (Rif. 9) to check proper alignment .
Before connecting the cabinet to the electrical line, make sure that the rating plate data
matches the characteristics of the electrical system to which the cabinet must be
attached.
For the cabinet to operate correctly, the room temperature and relative humidity must
not exceed the limits relative to climatic class 3
(+25°C; R.U. 60%)
established by the
norms
EN-ISO 23953 - 2
with which the counter has been tested
.
10_1.Lock of glass panel on bottom tank
The glass panel on the bottom tank must be locked to avoid it from tipping over during
its use (sales).
Any modification to the installation described herein must be authorized by
ARNEG Spa
z
If the cabinet is displaced, re-check its levelling; an incorrect levelling
compromises operation of the cabinet.
The back of the aluminium handle of the glass panel on the
bottom tank features a steel lock spring.
Rotate the steel spring
Keep the spring in rotated position and insert the handle into
its seat in the cabinet
