Arnica ET 14402, Instruction Manual

WARNING! SOME FEATURES MAY VARY AS PER MODEL.

MAKE SURE THAT THE CORD OF THE APPLIANCE IS DRY AT ALL

TIMES. DO NOT  REWIND THE CORD IF IT IS WET OR HUMID 

Sofa cleaning nozzle (C4) is used to clean sofas, pillows, mattresses, seating surfaces. 

Pull the power cord to the desired length by holding it from the plug and plug it 

to the outlet. 

You may set the suction power as you desire  by using (A5) suction power control knob 
When you complete your work with the appliance ; 

Push cord rewinder button ( A4) or hold and pull the cord slightly to rewind . 

When you do not use the appliance, place brush into the parking socket (A12)

as  horizontal or vertical park position , cradle together with the tubes and the hose. 

Do not store your appliance outdoors or  at the temperatures lower than the 

freezing temperature.

V.CLEANING AND MAINTENANCE

Always unplug the appliance before starting any cleaning or maintenance operations.

hygiene and to extend your vacuum cleaners life, never leave the appliance dirty.

Clean the appliances’s surface , tubes and accessories with a moist towel.

Always check the dirt level in the dust container and never let the dust level to exceed

max sign on the side of the dust container. 

To empty the dirt in the dust container ;

Push the dust container eject button(A9) and lift the container upwards.Take the dust 

container cover(A7) out and empty the dirt in the dust container(A6).

You can wash the dust container(A6) and the dust container cover (A7) with warm 

water but make sure to dry completely before reuse.

water. Never use chemicals or detergent. Make sure to dry completely before reuse. 

MAKE SURE THAT THE DUST CONTAINER, DUST CONTAINER COVER 

AND ALL FILTERS ARE DRY AT ALL TIMES. DO NOT REINSTALL WHEN

WET OR HUMID. DO NOT OPERATE THE APPLIANCE WITHOUT FILTERS

7

5

6

3

4

C. ACCESSORIES GROUP

III. TECHNICAL SPECIFICATIONS

IV. ASSEMBLE & USE