3.4 Updating ARNU Box™ Pure Linux
The ARNU Box™ Pure Linux has a simple over the air update tool that makes loading
the latest firmware to the system a snap. Follow these steps:
SECTION 3
ARNU Box™ -
PURE LINUX
SECTION 3
ARNU Box™ -
PURE LINUX
3.3 Setting up your Wireless Connection
3.5 Factory Reset ARNU Box™ Pure Linux
If there is a need to reset the ARNU Box™ Pure Linux back to factory settings follow
these step:
Start at the home screen and scroll to the Heading labeled ADD-ONS
Using the directional buttons select Programs and press OK
Select System Settings and press OK
Press right on the directional remote to move to the second column
Using the directional buttons select Factory Reset
Do not unplug or touch the ARNU Box™ Pure Linux unit or remote while the
system restores
1.
2.
3.
4.
5.
6.
Press the Green button on your ARNU Box™ branded remote (this will open the
Wireless Manager)
Using the directional buttons, find your Wireless network name and press OK
Using the directional buttons and the on-screen keyboard enter your network
password (The ARNU Box™ will now connect to the selected network)
Using the directional buttons select “Close” or press the Home button on your
remote.
1.
2.
3.
4.
Setup your Wireless Connection with a remote
other than the branded ARNU remote
Using the directional buttons scroll right until you reach the heading labeled
“SYSTEM”
Using the directional buttons select Network Manager and press OK/Enter
See above instructions for the rest of the process
1.
2.
3.
Start at the home screen and scroll to the Heading labeled ADD-ONS
Using the directional buttons select Programs and press OK
Select ARNU Box™ Update Service and press OK
Press right on the directional remote to move to the second column
Select Check for updates now (if there is an update available it will download
1.
2.
3.
4.
5.
20
19
