- 83 -
G
RAPHIC
D
ISPLAY
At the centre of the control panel there is a large graphic display, which provides, in the foreground and in real time, a
detailed overview of the current status of the UPS. Directly from the control panel you can turn the UPS on/off, view the
electrical values of the mains, output, battery, etc.,
(1)
and make the main machine settings.
The display is divided into four main areas, each with its own specific function.
Sample screens of the graphic display
(screens are only indicative, the data shown may not reflect the actual situation)
GENERAL INFORMATION
Area of the display that shows the date and time permanently, and, depending on
the screen, the model of the machine or the title of the menu currently active.
VIEW DATA / BROWSE
MENUS
Main area of the display used to view the UPS measurements (updated constantly
in real time), and to access the various menus that may be selected by pressing
the relevant function keys. Once the desired menu has been selected, this part of
the display will show one or more pages containing all the data related to the
menu chosen.
UPS STATUS/
ERRORS – FAULTS
Area indicating the operating status of the UPS.
The first line is always active and constantly shows the current status of the UPS;
The second is only active when an error and/or fault occurs on the UPS and
indicates the type of error/fault that has occurred.
On the right, each line indicates the code corresponding to the event in progress.
KEY FUNCTIONS
Area divided into four boxes, each one corresponding to the function key below it.
According to the menu active at that moment, the display shows the function for
the corresponding key in the relevant box.
Key Symbols
To gain access to the main menu
To return to the previous menu or screen
To scroll through the various items on a menu or move from one page to another while viewing
data
To confirm a selection
To temporarily silence the buzzer (hold down for more than 0.5 sec.).
To cancel a programmed switching-on/off (hold down for more than 2 sec.)
(1)
The precision of the measurements is: 1% for voltage measurements, 3% for current measurements, 0.1% for frequency
measurements.
The indication of the autonomy time left is an ESTIMATE; so it should not be considered to be a perfectly accurate tool.
Summary of Contents for Flexus FM
Page 33: ...84 DISPLAY MENUS...
