DRAINING THE COLLECTED WATER
When the water tank is full (approx. 900ml of water collected), the dehumidifier will
automatically turn OFF and the LED light will start flashing.
1. Switch off the dehumidifier and remove the water tank. [
Figure 2.1
]
2. Remove the water tank cover. [
Figure 2.2
]
3. Drain the collected water from the water tank. [
Figure 2.3
]
4. Replace back the water tank cover. [
Figure 2.4
]
5. Put the water tank to the appliance. [
Figure 2.5
]
Figure 2.1
Figure 2.2
Figure 2.3
Sleep
9
Figure 2.4
Figure 2.5
Sleep
Using a drain hose (continuous drainage)
•
When using a drain hose, the collected water is drained out of the drain hose outlet.
•
The connected hose must be sloping downwards as the drain hose outlet does not
operate with pump.
•
Open the drain hose outlet and connect the hose. [
Figure 2.6
]
•
Place the end of the drain hose at a suitable drain.
Figure 2.6
