12
If Using The Water Tank to Collect Water
When the water tank is full, the dehumidifier will automa�cally turn OFF and the will
start blinking.
If Using a Drain Hose (Con�nuous Drainage)
Follow the below �ps to properly use the drain hose for con�nuous drainage.
Connect the hose to the drain hose outlet.
[Figure 6(a)]
The connected hose must be sloping downwards as the drain hose outlet does not
operate with a pump.
[Figure 6(b)]
Place the end of the drain hose at a suitable drain system.
Switch OFF the dehumidifier and remove the water tank.
[Figure 5(a)]
Drain the collected water from the water tank.
[Figure 5(b)]
Rinse inside of the water tank with clean water.
Wipe any water on the outside of the water tank with a dry cloth.
Place back the water tank to the appliance.
[Figure 5(c)]
Allways turn OFF and unplug the dehumidifier before draining the collected water.
Figure 5(a)
Figure 6(a)
Figure 6(b)
Figure 5(b)
Figure 5(c)
DRAINING THE COLLECTED WATER
