7
Steps To Remove Filter Packaging
1.
2.
3.
4.
5.
All packaging material and promo�onal labels should be removed before using your
dehumidifier for the first �me.
The filters are a�ached to inner side of the air inlet grille at the back of the dehumidifier. The
filter pack includes a mesh dust filter to trap larger airborne par�cles, High Grade H13 True
HEPA Filter to capture fine par�cles and a black Ac�vated Carbon Filter to help reduce odours
and smoke, as shown in
[Figures 1]
.
This dehumidifier comes with the filters fi�ed inside and packed with plas�c for performance
protec�on purpose. The filters MUST be removed from its packaging before opera�ng the
device.
Open the air inlet grille.
[Figure 1(a)]
Disengage the filters pack from the air inlet grille.
[Figure 1(b)]
Remove the filters from its packaging.
[Figure 1(c)]
A�ach the unpacked filters back to the air inlet grille in the order, as shown in
[Figure1(c)]
.
Place back the air inlet grille onto the dehumidifier. Ensure the grille sets properly into its
place before opera�ng the unit.
Ac�vated Carbon
Filter (black colour)
H13 True HEPA
Filter (white colour)
Figure 1(a)
Figure 1(b)
Figure 1(c)
BEFORE THE FIRST USE
