SC-350/SC-360
–
User’s
Guide
–
019223-101
Rev
06
14
Troubleshooting
WARNING!
Risk of electric shock!
Follow the safety Precautions.
Blank Display/Machine Does Not Start
If the display is blank when the machine is switched On, check the
power cord. If the power cord is properly connected but the
machine still does not work, contact your SUZOHAPP
representative.
Display Goes Blank
The power supply for the electronic unit has an automatic thermal
cut-off function which is activated if the power supply is
overloaded.
Switch the machine Off and allow it to cool off for 15-20 minutes
(depending on room temperature) to reach normal operating
temperature.
Motor Stops
Note!
The inspection cover must be closed in order to start the machine.
The motor has an automatic thermal cut-off function which is
activated if the motor winding overheats.
Switch the machine Off and allow it to cool off for 15-20 minutes
(depending on room temperature) to reach normal operating
temperature.
If the motor is often overheated, contact your SUZOHAPP
representative.
Summary of Contents for SCAN COIN SC-350
Page 1: ......
Page 2: ...SC 350 SC 360 User s Guide 019223 101 Rev 06...
Page 3: ...SC 350 SC 360 User s Guide 019223 101 Rev 06...
Page 23: ......