18
Keys Mode Function
Standard display Enters the operation menu
Operation menu Enters the setting mode
Saves the settings and returns
to operation menu
Standard display Operates channel selection
Operation menu Operates menu selection
The setting mode Switches status
Switches between the
displayed channel and
displayed frequency
Operation menu Returns to the standard display
Gives up the setting and returns
to the operation menu
Power off status Turn on the receiver
Turn off the receiver and
adjust the volume
ESC
ON/
OFF
3.3 Introduction of keys
SET
/
Standard display
▲
▲
The setting mode
The setting mode
19
3.4 Operation Instructions
3.4.1 Advance Preparation
1. Prepare two AA batteries.
2. Press two battery cover latches at the side of
battery cover simultaneously. Open the battery
cover and place two AA batteries in the
compartment,making note of the battery polarity
shown in the battery compartment, then close
battery cover until it snaps shut.
to select the menu clockwise to select the menu
counterclockwise.
When the keyboard lock function is disabled, pressing
any key will turn the backlit lamp on. If no key operation
has occurred in 15 seconds, the backlit lamp will turn off.
Press “ESC” key to display the present frequency of the
current channel. If press “ESC” key again, or no key
operation has occurred in 10 seconds, the standard
display will be returned. The user- selectable frequency
function has been enabled if the standard display is
unable to be returned. (Please refer to 3.5.4 to set )
▲
▲
Power on status
