8
3
．
Plug the headset microphone, lavalier microphone or
external audio input (such as MP3 player etc.) to the
microphone/audio input jack
②
.
4
．
Select the proper sensibility according to the actual
situation.
（
Please refer to the 2.5.3 for details.)
2.4.2 Power On/Off
1
．
Open the battery cover at
fi
rst.
2
．
Press and hold“ESC
（
ON/OFF
）
”for almost 1 second
when the power is off, then the backlit lamp of
LCD turns on and appears the standard display;the
red power status indicator
⑤
turns on and transmitter
is enabled at the same time.
3
．
Press and hold“ESC
（
ON/OFF
）
”for 3 seconds or
so when the screen is in standard display, then
the screen appears“OFF”; the backlit lamp of
LCD turns off and the transmitter is disabled.
●
The standard caliber of the microphone` s plug is
3.5mm
.
●
Please ensure that the mute mode is not enabled.
2.4.3 The Way of Carrying Transmitter
1. Wear the lavalier
microphone or head-
set microphone.
2. Clip the transmitter
over the proper
position of waistband
through the metal clip
on the rear panel of
the transmitter, or
hang the transmitter
on the front of the
chest by tying an
accessory string to
the accessories`slot .
2.4.4 Mute Mode
Slide the mute switch to the“MUTE”. When the display shows
“ ”, the mute mode is enabled. At this time, the
microphone audio input is off and the transmitter can not receive
any audio information.
2.4.5 Battery Capacity Indicator
When the red power status indicator
⑤
has turned on after the
transmitter is normally enabled ,the display will show the current
battery capacity.
3 segments
：
The batteries are at 90
％
or greater capacity.
2 segments
：
The batteries are at 60% or so capacity.
1 segment
：
The batteries are at almost 30
％
capacity.
0 segment
：
The batteries are at almost 10
％
capacity.
9
