14
Multifunction LCD Digital Timer
Operation in Run Mode
Operation in Run Mode
Present value
Present value
OFF set value
ON set value
Set OFF set time
with
the corresponding keys.
Set ON set time
with
the corresponding keys.
Present value and OFF Set Time
The present value is displayed in the main display and the OFF Set Time is displayed in the sub-display.
"A"and'' Range '' light at the same time.
Present value and ON Set Time
The present value is displayed in the main display and the OFF Set Time is displayed in the sub-display.
"B"and'' Range '' light at the same time.
Explanation of functions
OFF Time range (timr)
Set the range to be timed in the range 000.000s to 999999h.
ON Time range (timr)
Set the range to be timed in the range 000.000s to 999999h.
Timer Mode (timm)
Set either the elapsed time (UP) or remaining time (DOWN) mode.
ON/OFF Start Mode (totm)
Set either the flicker OFF start or flicker ON start.
For details on start mode, refer to “timing charts”.
Input signal width (iflt)
Set the minimum signal input width (20ms or 1ms) for signal, reset, and gate inputs.
NPN / PNP Input Mode (imod)
Select NPN input (no-voltage input) or PNP (voltage input) as the input format. The same setting is used for
all external inputs. For details on input connection, refer to “input connections” on page 25.
Key Protection Level (kypt)
When the key protection switch is ON, it is possible to prevent setting error by prohibiting the use of certain
operation keys by specifying K/P level (KP-1 to KP-5). For details, refer to “Key Protection Setting Mode” on
page 9
■
■
Summary of Contents for TC-Pro480 Series
Page 1: ...Ver 3 0...
Page 35: ...List of Models...
