8
Multifunction LCD Digital Counter
Total Operation
TC-Pro48 has a total counter, separate from the -stage present counter, for counting the total accumulated
value.
the total counter continues to
count the total accumulated
value when the present value is
reset using reset/reset input
(reset key).
the total count value is reset
when the total reset/reset
2 input is turned ON. If the
reset key is pressed while the
total count value is reset. The
present value is also reset at
this time.
the counting range of the total
counter is -99,999 to 999,999
(-999 to 9,999). The total count
value returns to 0 when it
reaches the full scale limit.
◆
◆
◆
Batch Counter Operation
TC-Pro48 has a batch counter, separate from the -stage present counter, for counting the number of times
the count value returns to 0 when it reaches the full scale limit.
The batch counter continues
after count completion.
Batch output is held until batch
counter reset is input.
When the batch counter reset
input is turned ON, the batch
count value is reset, and batch
output turns OFF.
If the reset key is pressed
while the batch count value is
displayed, the batch count value
is displayed, the batch count
value is reset and batch output
turns OFF. The present value is
also reset at this time.
◆
◆
◆
◆
Note:
The batch count value is held at 0 during batch counter reset input.
If the batch count set is 0, batch count will be performed but there will be no batch output.
The batch count value returns to 0 when it reaches 999,999.
Once batch input has been turned ON, it will return to the ON state after power interruptions.
If the batch count set value is changed from a value that is greater than the batch count value to one that
is less, batch output will turn ON.
■
■
.
2.
3.
4.
5.
Summary of Contents for TC-Pro481 Series
Page 1: ...Ver 3 0...
Page 38: ...Comparison Table...
