35
• Enter the user code you’d like to use to operate the safe.
If the code is authorised, the knob will light up in green and the
main menu will appear in the mobile app so you can operate
the safe. If the user is not authorised, the knob will light up in
red and you will see an error message in the app.
•
Press the central open button
on the main menu, then
the knob will light up in green
and beep for 2 seconds,
and during this time you will be able to open the safe by
manually turning the knob
(90 degrees clockwise).
NOTE:
The remaining battery power will be displayed under
the open button on the app.
User menu
Administrator menu
Closing:
• Turn the knob 90 degrees anti-clockwise. You will hear 3
consecutive beeps, indicating that the safe has been closed
correctly.
The settings described below can only be accessed once the
user has entered the Administrator code on the main menu.
The Administrator will also be able to find a guide for
commonly-used functions in the upper right corner, which they
can check whenever they need to:
1.3. CONFIGURING THE SYSTEM (ONLY
AVAILABLE FOR THE ADMINISTRATOR)
a. Configuring the WiFi connection
Press the WiFi icon in the upper right corner of the app, select
the network you’d like to connect your safe to and enter your
WiFi password.
If the process has been completed correctly, the knob will light
up in green and the settings will be saved in the safe’s memory.
They can then be changed as many times as you like.
On the main configuration menu, the WiFi icon will be green
once the connection has been established and red or orange if
there is a connection problem between the safe and the internet.
If this happens, you should check the internet connection on
another device that is connected to the same WiFi network, or
make sure that you entered the correct password.
En
A4 instrucciones AWA idiomas.indd 35
3/11/20 13:58
