Arregui FORMA C, Instruction Manual And Guarantee

<EN>

<< On pressing      , the green 
light flashes; on keying in the 
code a beep sounds with each 
touch; but, on pressing     

4 short beeps sound and the 
light goes off. 

<< You are pressing the keys 
normally, but after a few 
seconds, the light goes off and 
the keys are not working. 

<< You are carrying out the 
opening process normally and, 
when you press      , the conti-
nuous green light comes on but 
after a few seconds it turns off 
and you cannot turn the key.

<< The safe is emitting a beep 
every 5 seconds and, when you 
try to press any key the safe 
will not work.

<< On pressing      , the red light 
comes on flashing. 

<< After changing the batteries 
the safe continues with the red 
light instead of the green. 

< The entered code is incorrect, 
try again. 

< Too much time has passed bet-
ween pressing two keys. You have 
a maximum of 15 seconds between 
pressing two keys. After this time 
the safe closes. Repeat the process. 

< You have taken too long in tur-
ning the key or the handle. After 
pressing       you have 3 seconds to 
turn the key or the handle.

< The safe is blocked, because 
someone has keyed in an incorrect 
opening code 5 times in a row. 
Wait 15 minutes and the safe will 
unblock automatically. Then you 
can continue as normal. 

< The safe is warning you that 
the batteries are running out. The 
safe is able to carry out several 
openings after the appearance of 
the red light. Even so, you should 
not rely on this and should change 
the batteries as soon as possible.

< It is usual that after opening 
the safe for the first two or three 
times after changing the batteries 
the safe continues using the red 
light. Check that it returns to using 
the green light by carrying out 
several consecutive openings. If 
the problem persists check that 
you have inserted the batteries 
correctly.

BEFORE CALLING THE TECHNICAL SERVICE, 

CHECK: