<EN>
Thank you for purchasing this TITAN safe. We advise you to read the instructions before you install and use
the safe to prevent its improper use from making the guarantee void.
This safe is meant to protect your valuables. Due to its heavy weight, it is advisable to place it on firm flooring.
FRONT DIAGRAM OF THE SAFE:
B.1. BATTERIES INSTALLATION AND OPENING
• Extract the battery compartment located outside the safe, at the lower part of the keyboard, and place 1
alkaline battery of 9 V.
• Enter opening code ( initial master-code is 1-2-3-4-5-6).
• Press
• A beep sounds. If the typed code is incorrect a long beep sounds and the operation must be repeated.
• Turn the key towards clockwise (in the case of the safe ref. 12000-S1) or turn the handle downwards (in the
case of the safe ref. 12300-S1) and pull it to open the door of the safe.
B.2. CLOSING
To close the safe, push the door and turn the key counterclockwise (ref. 12000-S1) or turn the lever upward
( ref.12300-S1).
B.3. PROGRAMMING OPENING CODES
This safe has 2 opening codes from 6 to 12 digits each one: a master code and a user code.
A. CHARACTERISTICS OF THE PRODUCT
B. OPENING AND CLOSING THE TITAN SAFE with electronic lock
(Ref. 12000-S1 and Ref. 12300-S1)
12300-S1
Opening system with electronic
lock + lever
12000-S1
Opening system with electronic
lock + double bit tumbler lock
12100-S1
Opening system with double bit
tumbler lock+ lever
WARNING:
• For your own security, it is recommended to change the opening code as soon as you
open the safe for the first time (see point B.3.).
WARNING:
• For your own security, it is recommended to change the opening code while the safe
door is open. If you introduce a wrong number, you can press the key to delete it.
intrucciones TITAN.indd 9
22/06/15 08:41
