ARREL Audio
R-501 ELITE User Manual, Issue 0.2
Page 6
A LED bargraph (10 LEDs) is used to display the output level.
The
R-501 Elite,
offers a milk white-painted (RAL 9001) front panel and a semi closed
enclosure and has been designed to be compliant with the 500-series standard.
R-501
Elite
is dedicated (due to his absolute sonic level quality) to high professional vocal
recordings, classical instruments, high dynamic range instruments such as drums and
percussions.
ARREL Audio
products are
designed and manufactured in Italy.
Housing
The R-501 Elite Mic-Line Preamp Module has been designed to be compliant with the 500-
series standard.
Installation Instructions
Remove the R-501 Elite module from the packaging.
Turn off the 500-series enclosure and remove mains power.
Find an empty slot in the 500-series rack and remove the 2 fastening screws,
positioned one on the top of the enclosure and one the bottom of the enclosure.
Insert the R-501 Elite into the empty slot in the 500-series enclosure, Be sure that
the rear edge connector on the R-501 Elite module mates correctly with the edge
connector of the 500-series enclosure.
Replace the 2 fastening screws through the top & bottom holes in the R-501 Elite
module and screw into the 500-series enclosure. The module must be secured into
the enclosure before turning the mains on.
Apply mains power into the 500-series enclosure and turn on.
Connect the microphone, audio source or instrument and select the correct settings.
The module is not designed to be hot-plugged, so please ensure the power to the
500-series enclosure is OFF before inserting or removing a module (this
recommendation is useful in order to protect the 500 enclosure circuits, our product
due to a very robust construction could be hot-plugged without problems).
