Camera Body
44
knurled knob
knurled knob
• Lock the magazine completely into the camera opening.
Note:
The magazine drive gear engages automatically.
Lightly turning the knurled knob on the movement
block facilitates the precise engagement of the
gear wheel if necessary.
• Check that the magazine is firmly seated.
• With your right hand pull the film loop downwards out
of the camera
➪
photo
. Then push it as far upwards as
possible until the loop can be positioned between the
movement plate and the film gate.
Note:
The film cannot yet be completely placed into the
film channel.
• Turn the knurled knob
➪
photo
on the movement until its
marking matches that on the movement block.
• Turn the movement locking lever towards the “OPEN”
position to swing the movement block away from the
film gate.
Summary of Contents for ARRIFLEX 435 ES
