C
a
m
e
ra C
o
n
fi
g
u
ra
ti
o
n
49
Setup Information Digits
Three digits shown next to the settings for HD-
SDI mode, output range, color matrix and contrast
characteristic
➪
image
provide basic information
about which of the outputs are using the same or
different settings for these parameters (also see table
below). The information is based on the parameters
of the currently selected "Output Board".
Note: When "ALL (1>2>SD)" is selected, the
setup information digits are based
on the HD-SDI 1 configuration.
The example
➪
image
shows the setup
for output board HD-SDI 1:
HD-SDI 2 is set to a different HD-
•
SDI mode and output range.
Both settings do not apply for the SD output.
•
The settings for color matrix and contrast
•
characteristics are the same for all outputs.
Symbol
Meaning
1
Setting applies to HD-SDI 1.
2
Setting applies to HD-SDI 2.
S
Setting applies to SD output.
.
Setting does not apply to HD-SDI 1, HD-SDI 2 or
SD, depending on which digit the period is on.
-
Setting is not available for SD output.
User Mode:
Advanced
White Balance: 3200 K
Framerate:
24PsF
Output Board: HD-SDI 1
HD-SDI Mode:
HD444
1.-
Output Range: Normal Range
1.-
Colour Matrix: 3200 K
12S
Contrast Char.: EI 200
12S
SD Mode
Diagnostics
Exit
Main Menu
