C
a
m
e
ra C
o
n
fi
g
u
ra
ti
o
n
53
Color Matrix (Advanced Mode)
The color matrix applies a color transformation
for the intended output color space.
HD workflow
The color matrix selection offers settings for each white
balance preset and additional 125% and 75% saturation
settings for tungsten and daylight. These settings
are calculated for the ITU-R BT.709 (HD) color space
and, in combination with EI characteristic curves (see
below), are recommended for use in HD workflows.
LOG/DI workflow
The camera additionally provides a LOG setting for use in
LOG/DI workflows. This matrix is based on film densities
to provide a color rendition that closely matches
negative stock and is recommended in combination
with the logarithmic characteristic setups (see below).
To set the color matrix for the selected output board:
Enter "Color Matrix"
•
➪
image
.
Select and confirm a
•
color matrix from the list.
Note: The camera does not offer optimized color
matrix settings for automatic or manual white
balance values. For automatic or manual
settings, it is recommended to select the color
matrix delivering the best match to the set
white balance. This should be evaluated using
a color checker chart and a vector scope.
Colour Matrix ALL
3200 K
4300 K
5600 K
7000 K
5600 K Sat. 125%
5600 K Sat. 75%
3200 K Sat. 125%
3200 K Sat. 75%
LOG
Matrix OFF
Cancel
