C
a
m
e
ra C
o
n
fi
g
u
ra
ti
o
n
59
SD Mode
The SD mode menu is used to change the settings
for the output zebra and the format markings
displayed on the composite video and S-Video
outputs, and to adjust the SD output to the
video format of the connected SD monitor.
Output Zebra Setup
The output zebra shows a slanted color pattern overlay
in image areas reaching the set threshold exposure level.
It is only available on the SD output of the camera.
To activate and configure the viewfinder zebra:
Enter "SD Mode", "Output Zebra"
•
➪
image
.
Use "High" and/or "Low Zebra" to
•
activate or deactivate the function.
Use "High" and/or "Low Zebra Level", to
•
enter the threshold video levels.
Use "High" and/or "Low Zebra Color" to
•
change the zebra pattern color.
Use "Exit" to quit the output zebra setup.
•
Note: High and low zebra operate independently
and remain active above the set thresholds.
It is not possible to set the zebra to be
active only between low and high level.
Note: Output zebra is a part of the OSD
tools (see: OSD Tools below).
Output Zebra:
Off
SD Video Mode:
NTSC
Format Marking:
1.78:1
Cancel
SD Mode
High Zebra:
Off
High Zebra Level: 83.0%
High Zebra Colour: Red
Low Zebra:
Off
Low Zebra Level:
20.0%
Low Zebra Colour: Yellow
Cancel
Output Zebra
