Operation
17
7 Operation
The CUB-1 can operate in three different modes:
7.1
Distance
The distance mode converts serial distance readings and streams it to all
LBUS devices.
Connect a UDM-1 or similar device like the Cine Tape Measure to the CUB-1.
If a serial data stream is detected, the indication letter
D
is illuminated.
7.2
Camera
The camera mode is for controlling 3rd party camera. Rec start/stop and user
buttons.
See "Compatibility", page 24 for further information about 3rd party
cameras.
7.3
Motor
The motor mode allows the control of the motors via RS232. For information
about the protocol contact the ARRI service team.
service@arri.com