ARRI MB-20 Quick Guide 02/2006, Page 5
The Basic Module
The Basic Module is the core plate of the Matte Box in front of which the sunshade and flags are mounted.
Behind it is fitted either a two or three stage filter holder. One edge has two mounting holes which allow either
the Clamp-on Adapter or Swing Away Module to be fitted.
The Filter Stage
Basic Operation
Fit the cut-outs on the front of the Filter Stage over the corresponding tabs on the back of the Basic Module in
the position shown, and then slide it into the central position until it locks in place (1). To remove it again, pull
the filter release lever forward (2) and reverse the procedure.
Mounting holes
Sunshade
release
knobs
Basic Module
Basic Module
Filter Stage
Release knob
Cut-outs
1
Blue clamp
knobs
2
