16
Mounting & Operation
8
Mounting & Operation
Lens Rear Part
The rear part of the lens contains a magnetic holding system,
to attach different lens accessories. A net holder is included as
standard part with the lens.
1 To remove the accessory element, like the net holder,
simply lift it from the rear part of the lens by hand.
2 To secure a net on the net holder, use a small rubber
band. A slight rotation of the net holder will simplify this
operation.
3 To attach the accessory element to the lens, like the net
holder, put it on the rear part with the marking on the rear
part and the element aligned.
CAUTION!
•
Use the lens only with an element, like the net holder,
attached to the lens!
•
Be careful not to touch the rear lens when attaching or
removing accessory components of the rear part.
•
When using a net attached to the net holder, take
precautions that neither the rubber band or the net are
blocking or damaging the LDS-2 contacts, the LPL mount
or the image sensor on the camera.
Lens Mounting
1 Remove the rear cap of the lens.
2 Make sure the rear element of the lens is clean.
3 Always have the net holder or other accessory elements
installed on the rear part of the lens.
4 On camera side, turn the bayonet ring anti-clockwise until
it stops.
5 Remove the lens port cap of the camera.
