background image

28

Declarations of Conformity

12 Declarations of Conformity

Note: Changes or modifications not expressly approved by the

party responsible for compliance could void the user's authority to

operate the equipment.

EU Declaration of Conformity

Directive 2014/30/EU of the European Parliament and

the Council of 26 February 2014 on the harmonisation of

the laws of the Member States relating to electromagnetic

compatibility - OJ L 96, 29.3.2014, p. 79–106

Directive 2011/65/EU of the European Parliament and

the Council of 8 June 2011 on the restriction of the use of

certain hazardous substances in electrical and electronic

equipment - OJ L 174, 1.7.2011, p. 88–110

The compliance with the requirements of the European Directives

was proved by the application of the following standards:

EN 55032: 2015; EN 55103-2: 2009

EN 50581:2012

To evaluate the respective information, we used:
http://ec.europa.eu/growth/single-market/european-standards/

harmonised-standards/index_en.htm

Munich, 15 May 2018

sign Walter Trauninger

sign Dr. Sebastian Lange

Managing Director

Head of Central Quality Management

FCC Compliance Statement
Class A Statement:

 This equipment has been tested and found

to comply with the limits for a Class A digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the

equipment is operated in a commercial environment.

Summary of Contents for SIGNATURE PRIME 12/T1.8













































Reviews: