ARRI SkyLink, User Manual

Configuration

12

Configuration

Web Portal

All configuration of the ARRI SkyLink Base Station can be done through its integrated web portal.

To access the web portal:

1.Connect to the SkyLink Base Station WiFi or Ethernet port.

2.Open web browser on computer or mobile device.

3.Enter the IP address of the SkyLink Base Station into the URL box of the web browser.

(Default IP address is 192.168.0.100)

Status Page

The Status Page of the SkyLink Web Portal will give device information and allow for adjustment of device 
name and factory reset.

Device Information

States the model description of the device and the 
RDM UID.

Box Name

Allows the user to set the name of the Base Station 
which will also be used as the WiFi SSID.

Factory Reset

Allows the user to perform a factory reset which will 
restore all the device settings to their original facto-
ry defaults. A factory reset can also be performed 
by holding the RESET button on the rear for 10 
seconds while powering up. 

Wireless Page

The Wireless Page allows the user to configure several settings related to the wireless radios in the SkyLink 
Base Station.

CRMX Output Power

Allows the user to set the power output of the 
LumenRadio CRMX radio. Higher output power 
can increase CRMX range, but may reduce effec-
tive WiFi range in some situations. Options are: