ARRI SkyLink, User Manual

13

ConfigurationConfiguration

13

.

Click “Save” after a change is made to store your new setting.

CRMX Link

Allows user to Link or Unlink all CRMX receivers powered on and in range of the SkyLink Base Station.

WiFi

Allows user to set the WiFi channel (1 through 11). Refer to the section on 

RF Management

 for more 

details about selecting an operating channel in environments with multiple WiFi networks.

Click “Save” after a change is made to store your new setting.

SSID

This is the name of the WiFi network. The user can change this name to any they would like.

Click “Save” after a change is made to store your new setting.

Password

The user can set a custom password for the SkyLink Base Station WiFi network. The default password is 
“ArriSkyLink”. Please note that passwords are case sensitive. 

Click “Save” after a new password is set to store your new setting.

IP Settings Page

The IP Settings Page allows users to configure 
different settings in relation to IP (Internet Protocol) 
attributes.

DHCP Mode 

Click “Save” after a change is made to store your new setting.

Minimum

Outputs 

5mW

, suitable for small sized locations.

Low

Outputs 

25 mW

, suitable for medium sized locations.

Normal

Outputs 

100 mW

, suitable for large sized locations.

High (FCC Mode)

Outputs 

125 mW

, suitable for locations with many obstructions.

Static IP (DHCP disabled)

The SkyLink Base Station will have a static IP address and will 

not

generate IP addresses for connected devices.

Static IP + DHCP Server

The SkyLink Base Station will have a static IP address and will also 
generate IP addresses for connected devices.

Dynamic IP (DHCP Client)

The IP address of the SkyLink Base Station and other IP devices on 
the network will be set by a third party device (such as a network 
router).

High (FCC Mode) output setting is only allowed for locations within the United States of America.
This mode is prohibited in locations outside of the USA.

NOTICE