W R S
_
System Guide
04/2006
-0
M H I 9 E C F E D ; D J I
M_h[b[iiPeecKd_j)MPK#)
M_h[b[iiPeecKd_j)MPK#)
The WZU-3 is used to control zoom. Zoom speed can be adjusted and zoom limits can
be easily set. The WZU-3 is similar to the WZU-1 except that it is lighter than the WZU-
1 and the position of zoom knob and the LENS limit controls are reversed. The reversed
zoom knob is in the perfect ergonomic position for the assistant’s thumb when the WZU-3
is used on WMU-3, WHA-2 or WHA-3.
Compatibility: For wireless operation, the WZU-3 was especially intended for use with
the WMU-3, although it can be used with other main units. For wired operation with
ARRICAM, 435 Xtreme or 416 Plus, WZU-3 can be used with Wired Handgrip Attach-
ments WHA-2 or WHA-3. The WZU-3 can be placed between the Wireless Focus Unit
and a Wireless Main Unit or Wired Handgrip Attachment, so focus, iris and zoom controls
are together on one small and lightweight controller. The WZU-3 should not be placed
between LDD-FP or WRC-1 and a Wireless Main Unit.
A($+((,-$&M_h[b[iiPeecKd_j)
PeecCW_dKd_j)PCK#)
For wireless use, the ZMU-3 becomes part of the ARRI Wireless Remote System.
Via the Wireless Zoom Bracket WZB-3 it attaches to the Wireless Main Unit WMU-3.
Compatibility: Studio & Lite LDB-2, WEM-3, UMC-3, UMC-1 & URM-2/3. Works
wired with any camera that has a 24V Fisher 3 Pin outlet or with an external 12V/24V
battery and selected video lenses. Works with CLM-1 or CLM-2.
A($,+&&)$&PeecCW_dKd_j)
M_h[b[ii;nfWdi_ed8hWYa[j)M;8#)
With this bracket the WMU-3 can accept two hand controllers simultaneously, for example
WFU and LDD-FP, or WFU and WRC-1.
Compatibility: For use with the Wireless Main Unit 3 (WMU-3) only. It is not possible to
operate the WRC-1 and the Lens Data Display for Focus Puller (LDD-FP) on the same
Wireless Main Unit. For wireless operation of WRC-1 and LDD-FP at the same time, two
Wireless Main Units must be used. The same is true for two WRC-1 and LDD-FP units.
A($+((*'$&M_h[b[ii;nfWdi_ed8hWYa[j)
M_h[b[iiPeec8hWYa[j)MP8#)
For wireless use, the ZMU-3 becomes part of the ARRI Wireless Remote System. Via the
Wireless Zoom Bracket WZB-3 it attaches to the Wireless Main Unit WMU-3. The special
shape of this bracket allows the assistant to position the ZMU-3 in relation to the WMU-3
to suit his/her personal preference.
A($,+&'-$&MP8#)
M_h[b[ii;nfWdi_ed8hWYa[j)M;8#)
PeecCW_dKd_j)PCK#)
M_h[b[iiPeec8hWYa[j)MP8#)
