Chapter 5
:
Configure your Ethernet connection
Final 1.0 October 2018
Touchstone TG3442S Telephony Gateway User Guide
© 2018 ARRIS Enterprises LLC. All Rights Reserved.
37
5.
Double-click
Internet Protocol Version 4 (TCP/IPv4)
to configure TCP/IPv4.
Note:
If your service provider requires TCP/IP version 6, double-click
Internet Protocol
Version 6 (TCP/IPv6)
to configure TCP/IPv6.
The TCP/IP properties window for the version you selected appears.
6.
For either TCP/IPv4 or TCP/IPv6, select
Obtain an IP address automatically
and
Obtain
DNS server address automatically
, unless instructed otherwise by your service provider.
7.
Click
OK
to accept the new settings and close the Properties window.
Configure TCP/IP for Windows 7, Windows 8, or
Windows 10
1.
Click the
Start
menu and type
network and sharing
into the Search box.
2.
Select
Network and Sharing Center
when it appears.
3.
Click
Change adapter settings
from the left-side menu.
4.
Right-click on your local area connection icon and select
Properties
to open the
Properties window.
5.
Select
Internet Protocol Version 4 (TCP/IPv4)
and click
Properties
to configure TCP/IPv4.
Note:
If your service provider requires TCP/IP version 6, select
Internet Protocol Version
6 (TCP/IPv6)
and click
Properties
to configure TCP/IPv6.
The TCP/IP properties window for the version you selected appears.
6.
For either TCP/IPv4 or TCP/IPv6, select
Obtain an IP address automatically
and
Obtain
DNS server address automatically
, unless instructed otherwise by your service provider.
7.
Click
OK
to accept the new settings and close the Properties window. Then click
Close
to
back out of the remaining setup screens.
Configure TCP/IP for macOS
1.
Open System Preferences, either by choosing
System Preferences
from the Apple menu
or by clicking the System Preferences icon in the dock.
2.
Click the
Network
icon.
3.
Choose
Automatic
from the Location drop-down menu, and
Built-in Ethernet
from the
Show menu.
4.
Choose the TCP/IP tab, if necessary.
If you are using
TCP/IPv4
, go to
step 5
.
If your service provider requires
TCP/IPv6
, go to
step 8
.