Chapter 4
:
Installing and Connecting your Data Gateway
Note: You must set up your computer and other client devices to work with the security
settings on the DG1680. Refer to the documentation for your client device for instructions on setting
security. On most computer systems you only need to select the network name (SSID) device and
enter the encryption key. If your computer or client device supports Wi-Fi Alliance WPS (Wireless
Protected Setup), activate WPS on your computer or client device and the DG1680 simultaneously
to easily set up your system security.
1.
Security Label
If you need to modify the Data Gateway’s default wireless security settings, or if you want
to configure any other wireless LAN settings, refer to the following instructions.
Accessing the Configuration Interface
Follow these steps to access the configuration interface. You should have already set up the
Installing and Connecting your Data Gateway
(page 16).
1.
If security has been properly set up on your computer to access the wireless LAN on the
DG1680, use the connection utility for your operating system to connect to the wireless
LAN using its network name (SSID), as shown on the security label.
2.
If you cannot access the wireless LAN, you must first establish a wired Ethernet
connection between your computer and the DG1680.
3.
In your web browser, open the page http://192.168.0.1/ to access the wireless router
setup.
The Login screen displays.
Release 16 STANDARD 1.3 March 2015
Touchstone DG1680 Data Gateway User Guide 22
