Chapter 4
:
Installing and Connecting your Data Gateway
Note: The default user name is “admin”. The default password is “password”, in lower
case letters.
4.
Enter the user name and password and click the Apply button to log in.
The System Basic Setup screen displays.
5.
Use the online help information to set configuration parameters as required.
Note: Most configuration parameters that you may want to set can be accessed on the
System Basic Setup screen, including the security mode and setting a system password.
Setting Parental Controls
The Parental Control feature allows you to block specified keywords and web sites from
being accessed and also to specify trusted computers in the network. Trusted computers
are not affected by the parental control settings.
Finding the MAC Address of a Computer
In order to set up trusted computers you must first determine the MAC address of those
computers.
Use the operating system of your computer to find its MAC address, as follows:
Windows: from the Start menu, find and select the
Control Panel
. Double-click
Network
Connections
(Windows XP), or
Network & Sharing Center
(Windows Vista or Windows 7). Then
double-click either “Wireless Network Connection” for a wireless connection, or “Local
Area Connection” for an Ethernet connection. Next click the
Details
button (Windows Vista
or Windows 7), or click the Support tab and then the
Details
button (Windows XP). The
“Physical Address” line shows the MAC address.
MacOS X: open System Preferences and click the Network icon. To find the Ethernet
MAC address, select
Built-in Ethernet
from the Show drop-down, then click the Ethernet tab.
The “Ethernet ID” field shows the MAC address. To find the wireless MAC address, select
Airport
from the Show drop-down, then click the Airport tab. The “Airport ID” field shows
the MAC address.
Linux: open a shell window and type
/sbin/ifconfig
(and press Enter). The wireless
interface is eth1 (unless there is no Ethernet adapter, in which case the interface is eth0).
Making Your Parental Control Settings
Follow these steps to set up your Parental Controls:
1.
Access and log into the wireless configuration interface as explained in Accessing the
Configuration Interface.
2.
Click the
Firewall
tab and then click
Parental Controls
in the side menu to display the
Parental Controls screen.
Release 16 STANDARD 1.3 March 2015
Touchstone DG1680 Data Gateway User Guide 23
