9
Copyright © 2016 Arrive Systems, Inc. All rights reserved.
Figures 3 and 4 discusses the various parts of the user tutorial screen :
3. Peer-to-Peer mode:
Figure 3: Peer-to-Peer mode tutorial screen
Review Figure 3 with the definitions below:
1. Enable wireless settings on your device and select this SSID. This SSID is not constant,
and will change from time-to-time.
2. This graphics provides a quick summary of how to connect various devices to Arrive
AirPoint.
3. Enter the PIN number here if you are connecting via Intel WIDI.
4. This is just for information and not required by users.
5. The Arrive AirPoint runs an internal webserver. This is the IP address of that webserver.
Should be used only by the System Administrator to setup the Arrive AirPoint.
Note:
PLEASE REMEMBER THAT YOU NEED TO DISCONNECT YOUR
BYOD MEDIA FROM THE SCREEN TO ALLOW OTHERS TO CONNECT.
SSID login code:
Each device has a unique SSID code. This unique SSID login code is provided to ensure users
connect to the display screen they wish to display their media on. It also provides the ability